Terrazzo Flooring: Epoxy and Polyurethane Poured Terrazzo

Terrazzo Flooring: Epoxy and Polyurethane Poured Terrazzo

7 productsConstruction Solutions

Terrazzo flooring is a decorative, hard-wearing floor made by mixing aggregates such as natural stone, glass, mirror or seashells with a colored resin binder, spreading the mix on the floor and, once it has cured, grinding the surface until the aggregate is exposed. Demmerg manufactures DEMCO EPOX 2400 TERRAZZO UV++ for epoxy terrazzo and DEMCO PUR 3400 TerraElite for polyurethane terrazzo, together with the primers and protective varnishes used with them.

Contact us

Because these systems are poured in place with a resin binder, they are also known as poured or liquid terrazzo. The binder color and the type, color and grain size of the aggregate are chosen together, so the look of the floor is designed for each project.

Epoxy and polyurethane terrazzo binders

  • DEMCO EPOX 2400 TERRAZZO UV++ – epoxy terrazzo: solvent-free, colored, modified epoxy binder used with aggregates of different sizes such as natural stone, glass, mirror and seashells. It has high physical and UV resistance, is impermeable to liquids and can be applied to concrete, ceramic and metal surfaces. Pot life is 50–80 minutes at 23 °C; full cure takes about 7 days.
  • DEMCO PUR 3400 TerraElite – polyurethane terrazzo: solvent-free, 100% solids, self-leveling colored polyurethane binder. Its hard-elastic structure absorbs deformations in the floor; it resists UV light and weathering and forms a seamless, continuous surface. Shore D hardness is above 60 and pull-off adhesion to concrete at least 1.5 N/mm²; at 23 °C it takes foot traffic after 48 hours and is fully cured after 7 days.
  • DEMCO EPOX 142 UV RESIN: solvent-free modified epoxy resin with high UV resistance for colored stone/aggregate and terrazzo systems. It gives a transparent appearance in decorative 3D floors and is applied on concrete primed with DEMCO EPOX 100 PR.

Coverage of all three binders depends on the type and grain size of the aggregate. For DEMCO PUR 3400 TerraElite the data sheet gives a general ratio of 1 part binder, 1 part dolomite (0–800 microns) and 4 parts aggregate.

Epoxy terrazzo system: layers and coverage

The sequence below is a typical epoxy terrazzo build-up with DEMCO EPOX 2400 TERRAZZO UV++. Coverage figures are the values from the product data sheets; where a data sheet gives no coverage, the quantity is set for each project according to the type and grain size of the aggregate.

  1. Impregnating primer (if needed): DEMCO EPOX 100 PR penetrates the capillary pores of the concrete, seals them and prevents dusting. One coat at 0.350–0.500 kg/m².
  2. Primer and quartz: solvent-free primer DEMCO EPOX 116 PR; consumption depends on the required film thickness (400 g/m² gives 350–370 µm). Quartz sand is broadcast onto it and, where the substrate requires it, a glass fiber mat is laminated in. DEMCO EPOX 116 PR bonds the following coats and the fillers broadcast onto it before it has fully cured; loose quartz is swept off after 24 hours.
  3. Terrazzo layer: DEMCO EPOX 2400 TERRAZZO UV++ is mixed with natural stone aggregate and filler, poured and spread; the proportions depend on the type and grain size of the aggregate.
  4. Grinding, filling and repair: the cured surface is ground with diamonds and pads until the aggregate is exposed. Pores and voids are filled with DEMCO EPOX 215 GEL, a solvent-free epoxy adhesive, filler and repair paste.
  5. Protective topcoat: UV-resistant, transparent polyurethane varnish DEMCO PUR 420 UV/S at 0.100–0.150 kg/m². For a matte finish, use the non-yellowing DEMCO PUR 425 UVM/S at 100–150 g/m², made as a final-coat varnish for terrazzo systems.

How is polyurethane terrazzo applied?

The concrete is cleaned of oil, rust, dust and loose material, roughened by shot blasting, grinding or milling, and primed with a suitable DEMCO solvent-free epoxy primer; cracks and holes are repaired with epoxy putty. After the two components of DEMCO PUR 3400 TerraElite are mixed, the pre-weighed aggregate blend is added and mixed at low speed for 2–3 minutes. The mix is poured without delay, spread with a trowel or screed and lightly pressed with a steel trowel to even the surface. After curing, the surface is ground with diamonds and pads until the aggregate is exposed. The protective varnish, DEMCO PUR 425 UVM/S or DEMCO PUR 420 UV/S, is applied over the finished terrazzo by brush, roller or airless spray.

Where is terrazzo used?

  • Airports and metro stations
  • Shopping malls, stores, showrooms and convention centers
  • Hotels, restaurants and tourism facilities
  • Museums and educational buildings
  • Sports complexes

DEMCO PUR 3400 TerraElite is used in both new and existing buildings. According to their data sheets, the binders inhibit the growth of germs and bacteria for a hygienic environment and are easy to apply and maintain.

Application conditions and curing

  • Surface: free of oil, rust, dust and similar contaminants, dry and without loose layers; glossy surfaces are roughened by shot blasting, grinding or milling.
  • Moisture: substrate moisture must be below 4%. Ambient humidity must be below 80% for DEMCO EPOX 2400 TERRAZZO UV++ and below 65% for DEMCO PUR 3400 TerraElite, DEMCO PUR 420 UV/S and DEMCO PUR 425 UVM/S. See moisture in concrete.
  • Temperature: for the epoxy binder, room and substrate temperature 15–30 °C and never below 10 °C; for the polyurethane binder, room and surface temperature 10–30 °C.
  • Mixing: pour all of component B into component A and mix at low speed for at least 3 minutes to avoid air bubbles; after adding the aggregate, mix DEMCO EPOX 2400 TERRAZZO UV++ for about 4–5 minutes. Prepare only as much as can be used up in one continuous run.
  • Curing: do not touch the surface or let it come into contact with water for 24 hours. DEMCO EPOX 2400 TERRAZZO UV++ is touch-dry in 8–10 hours and fully cured in about 7 days at 20–25 °C.
  • Primer waiting time: epoxy coats can follow DEMCO EPOX 100 PR after 2–4 hours; polyurethane coats need the primer to be touch-hard, which takes at least 12–24 hours at 15–30 °C.

Epoxy or polyurethane terrazzo?

Where movement or deformation of the floor is expected, the hard-elastic DEMCO PUR 3400 TerraElite is the natural choice. For application over existing ceramic or metal surfaces, consider DEMCO EPOX 2400 TERRAZZO UV++, whose data sheet lists these substrates. If a transparent binder is wanted, use DEMCO EPOX 142 UV RESIN.

For a decorative floor without stone aggregate, the metallic-effect epoxy DEMCO EPOX METALİK is an alternative: it is not terrazzo, it is for indoor use only and it is applied at 0.5–1.0 kg/m² per coat. Compare the two in metallic epoxy and terrazzo, and see decorative solutions, epoxy flooring and epoxy primers for other options. The full range is in the terrazzo and decorative flooring systems catalog.

Frequently asked questions

What is terrazzo flooring?

Terrazzo is a decorative floor made by mixing aggregates such as natural stone, glass, mirror or seashells with a binder, pouring the mix and, after curing, grinding it until the aggregate is exposed. Terrazzo poured in place with epoxy or polyurethane resin is also called poured or liquid terrazzo.

Is terrazzo expensive?

The amount of binder and aggregate is the main cost driver, and it depends on the type and grain size of the aggregate and on the thickness. Substrate preparation, the need for primer and glass fiber reinforcement, grinding and varnishing labor, and the size of the area also affect the price. See floor coating cost per m² or request a quote for your project.

What is the difference between epoxy and polyurethane terrazzo?

The epoxy terrazzo binder DEMCO EPOX 2400 TERRAZZO UV++ has high physical and UV resistance and can be applied to concrete, ceramic and metal surfaces. The polyurethane terrazzo binder DEMCO PUR 3400 TerraElite absorbs deformations in the floor thanks to its hard-elastic structure, is self-leveling and takes foot traffic after 48 hours at 23 °C.

How thick is terrazzo flooring?

Thickness depends on the grain size of the aggregate and the chosen system and is set for each project.

Can terrazzo be applied over existing ceramic tiles?

According to its data sheet, DEMCO EPOX 2400 TERRAZZO UV++ can be applied to concrete, ceramic and metal surfaces. Surface preparation and priming depend on the condition of the existing floor, so please consult our technical team for your project.

Is terrazzo a healthy, hygienic floor?

DEMCO terrazzo binders and primers are solvent-free, and DEMCO PUR 3400 TerraElite is 100% solids. According to their data sheets, the binders inhibit the growth of germs and bacteria for a hygienic environment, DEMCO EPOX 2400 TERRAZZO UV++ is impermeable to liquids and DEMCO PUR 3400 TerraElite forms a seamless surface. The protective varnishes DEMCO PUR 420 UV/S and DEMCO PUR 425 UVM/S are solvent-based.

Colour charts

Standard colours of our floor coatings and paints, and granite epoxy options.

Colour charts

System lookup

Find the floor and coating systems that suit your sector and application.

Find a system

Let's talk

Let's discuss your needs for durable floor and coating solutions together.

Contact us
Follow us