EN
tr
de
fr
es
pt
it
nl
ru
uk
pl
ro
bg
el
ar
fa
az
tk
uz
kk
he
Key technical facts
- Coverage
- Varies depending on the stone and aggregate used.
- Mixing Ratio (by weight)
- A/B (63/37)
- Pot Life (min., 23°C, 100 ml)
- 35-55
- Drying Time (23°C) – Touch Dry (Hours)
- 8 - 10
- Drying Time (23°C) – Full Cure (Weeks)
- 1
- Mixed Density (g/cm³, 20°C)
- 1,10 ± 0,10
Last updated:
This page has been translated from the product's original information. Please refer to the technical data sheet for binding technical values.
Images
Description
A solvent-free, epoxy-based binder system with high UV resistance. It is a modified epoxy-based resin used in colored stone/aggregate and terrazzo systems.
Advantages
- Contains no solvents.
- Low viscosity and easy to apply.
- Thanks to its UV resistance, it provides protection against UV and sunlight.
- Penetrates the capillary pores within the concrete structure.
- Provides a transparent appearance in decorative three-dimensional floor coatings.
Application Areas
- Colored stone/aggregate systems.
- Terrazzo systems.
Suitable Substrates
- Concrete surfaces primed with Solvent-Free Epoxy Impregnating Primer DEMCO EPOX 100 PR.
Technical Properties
| Number of Components | 2 |
| Mixing Ratio (by weight) | A/B (63/37) |
| Mixed Density (g/cm³, 20°C) (TS EN ISO 2811-1) | 1,10 ± 0,10 |
| Pot Life (min., 23°C, 100 ml) (DIN 16945) | 35-55 |
| Mixed Viscosity (mPas, 25°C) (EN ISO 3219) | 1500 – 2000 |
| Drying Time (23°C) (TS 4317) | |
|---|---|
| Touch Dry (Hours) | 8 - 10 |
| Full Cure (Weeks) | 1 |
| Thinner | Must not be diluted with thinner. |
Surface Preparation and Application
Surface preparation
- Surfaces to be coated must be free of oil, rust, dust and similar contaminants.
- The surface to be coated must be free of moisture, and no loose layer whatsoever may remain.
- Glossy surfaces should be roughened by shot blasting or milling.
- The prepared concrete surface must be primed with the Solvent-Free Epoxy Impregnating Primer DEMCO EPOX 100 PR, following the application instructions, so that it is fully impregnated.
- Any cracks and holes in the surface must be repaired using epoxy putty.
Mixing
- All of component B must be poured into component A and the two components mixed for at least 3 minutes until a homogeneous mixture is obtained.
- Mixing at low speed is recommended to prevent air bubbles from forming in the mixture.
Application
- The product is mixed with stone/aggregate or the terrazzo system in the desired ratio and poured onto the prepared and primed surface.
- Spread evenly over the surface with a trowel or straightedge.
Application Conditions
- Working area temperature must be 15°C – 30°C.
- The ideal substrate temperature is 15°C – 30°C. The temperature must never be below 10°C.
- For indoor and outdoor applications, substrate temperature, ambient temperature and ambient humidity must be taken into account.
- The relative moisture of the substrate must be below 4% and the ambient humidity below 80%.
- A suitable amount of mixture should be prepared during work, and work should continue until the entire mixture has been used.
- When applied at 20 – 25°C, the product reaches full cure at room temperature in 7 days on average.
Coverage
Varies depending on the stone and aggregate used.
Storage and Shelf Life
At 15 – 25°C, in dry, enclosed storage areas away from direct sunlight, in the unopened original packaging; 1 year.
Packaging
Total Net: 18 kg (A: 11,34 kg / B: 6,66 kg)
Safety Precautions
- Avoid contact of the mixture or components with skin and eyes.
- In case of contact, rinse with plenty of water and consult a doctor.
- Wear protective gloves, clothing and goggles.
- Keep out of reach of children.
Approvals / Standards
Tested to EN 1504-2 within the scope of CE certification.
