PLASTİK ASTAR 1 K

Description

Plastic Surface Primer 1K is a single-component, acrylic-based primer specially developed for preparing plastic surfaces in the car repair industry. It provides excellent adhesion on plastic surfaces before application and helps topcoats bond uniformly to the surface. Its easy-to-apply nature shortens application time, increases efficiency in repair work and allows a smooth topcoat finish to be achieved.

Advantages

• Provides excellent adhesion on plastic surfaces.
• Helps topcoats adhere uniformly to the surface.
• Its easy-to-apply nature shortens application time.
• Increases efficiency in repair work.
• Allows a smooth topcoat finish to be achieved on the surface.

Suitable Substrates

• PP-EPDM-based vehicle bumpers
• ABS-based vehicle parts

Technical Properties

Surface Preparation and Application

Surface Preparation

• Before degreasing, clean the surface with warm water and a suitable detergent, then rinse thoroughly with clean water. Use suitable cleaning thinners to remove any remaining dirt and grease residues.
• PP-EPDM-based vehicle bumpers / ABS-based vehicle parts: After cleaning the surface, abrade it with a red or grey scuff pad. After scuffing, clean the surface again with a suitable cleaning thinner.
• Painted thermoplastic parts: Use P220 – P320 abrasive for the final dry sanding step. For spot repairs, sand the edges of the repair area with P400.
• Surface cleaning: Clean the surface with a suitable cleaning thinner to remove contamination. Avoid contact of surfaces treated with filler with water or water-based cleaners.

Application Method

• Shake the product thoroughly before application.
• Remove all moisture from the painting equipment before use.
• Apply 1 coat (2 coats if desired) evenly over the entire surface of untreated plastic parts, extending each coat over a wider area than the previous one.
• Allow a flash-off time of 30 minutes at 20°C before applying primer/topcoat over it.
• Apply the primer/topcoat within 24 hours at 20°C. If this time is exceeded, sand the surface with a grey scuff pad and apply 1 full coat again.
• Products that can be applied over it: primers and topcoats.
• Clean the painting equipment thoroughly immediately after application so that no residue remains.
• Close the product lid tightly after application.

Storage and Shelf Life

When stored in unopened original packaging at 20°C in dry, enclosed warehouses away from direct sunlight, the shelf life is 1 year.

Packaging

Total Net: in 1L and 5L metal containers.

Safety Precautions and Points to Note

Read the product's safety data sheet (MSDS) before use.

• When working with the product, carefully read and follow all warning labels and instructions on the packaging.
• Always work with the product in a fully ventilated environment.
• Always wear suitable personal protective equipment when mixing and applying the product.
• Keep out of the reach of children.

Note: The above information has been prepared for professional users based on laboratory studies and field applications. For organization-specific applications and new design work, we recommend consulting our Technical Service. Our company accepts no responsibility for work carried out under unsuitable conditions or beyond our control.